In the metalworking, woodworking and industrial workshops, the saw is one of the most basic equipment. Right performance, high speed of cutting and high durability are only possible when the machine is properly maintained and repaired in a timely manner. Many of the failures in the strip are due to the constant use, the blade adjustment and the exhaustion of consumables.
Iran Machine Machine with years of experience in manufacturing, service and repair of strip saws in Tehran provides services that include the use of main parts, mechanical and electrical repairs, precise guidance adjustment, gearbox service and specialized troubleshooting. This reputable industrial center not only rebuilds the device similar to the first day, but it also multiplies its useful life.
What is the saw and why does it need specialized repair?
Saw is a device that uses a long, continuous strip blade to cut metals, wood and industrial materials. Regular rotational motion and high speed make the cuts precise, uniform and clean.
But this continuous performance puts high pressure on the vital parts of the device such as bearings, engines, wheels and blades. Over time, the vibration increases, the cutting path is diverted and the function of the device is impaired. Therefore, repair of saws must be done by experienced specialists using the main and standard factory components.
The main reasons for the sawdefin
Blade abrasion and rupture due to excessive work
Failure to adjust the height and angle of guides
Function with low -quality or inappropriate cooling liquid
Ballings and Monetary Development
loosen belts or deviation in high and bottom wheels
mechanical impact on the improper loading of the workpiece
lack of periodic gearbox and device engine
accurate understanding of the type of failure is very important in the repair of the strip, because each section must be accurately opened and adjusted to avoid disturbance in the ultimate function.
Specialized Steps to Repair Saw In Iran Machine
1. Troubleshooting and technical review of the device
In the first phase of Iran Machine Specialists, the machine examines the device thoroughly and identifies defective parts. Shake, sound, slow blade and high temperature are the most important symptoms of failure. This step includes electrical, mechanical and precision measurements and paids.
2. Open the worn pieces and check the blade
1. Repair and replace the main parts
All defective parts are replaced with original spare parts of Iran Machine Machinery, including industrial bearings, standard gearboxes, reputable brand electric motors and heat -resistant belts. Not only are these components in size and quality correspond to the model of the device, but also have higher durability and reliability.
1. Setting the blade guide and the performance test
At this stage the new blade is installed and its angle, stretching and height adjust. The device is then bright and several trial cuts are made to ensure the accuracy of the performance, lack of vibration and health of the bearing.
1. Lubrication and final service
Finally, all the mechanical contact points of the lubricant and the gearbox are filled with industrial oil. The soap water system (in equipped models) is also reviewed and the liquid output path is thoroughly washed.
The benefits of repairing the saw saw by Iran Machine Machine
use main parts and with quality warranty
Make precise settings to prevent shake and cut deflection
Complete Cutting Test Before Delivery of Machine
Quick Delivery at Customer Workshop in Tehran
Warranty Services and Post -Repair Support
specialized advice for better storage of the device
Iran Machine Machine as one of the prestigious saws repair centers in Tehran provides all its services with a formal warranty so that the customer's imagination is comfortable with the quality and durability of the device.
Cooling System in the saw and the importance of its service
Soap cooling or water is one of the important components of the saw. During the cut, the cooling fluid has the task of reducing heat and lubricating the surface of the blade. If the pumping path is blocked or operated with contaminated liquid, the blade temperature increases and will rapidly bend or fracture.
In Iran Machine Repair, soap water pump, internal filter, transfer hoses and the source of the machine are completely washed and set up and ready to work again.
The role of gearbox and motor in the saw performance
gearbox and motor are the beating heart of the saw. If any of these components suffer from abnormal erosion or sound, the function of the device will drop. Shake, delay in starting movement and overheating are symptoms of failure to do so.
In the Central Machinery Workshop of Iran, all kinds of industrial saws are repaired or replaced. The gearboxes are also regulated with hard -working wheels to transmit soft, quiet and high efficiency.
Special Services of Saw Repair in Tehran by Iranian Machinery
repair at the customer's location by sending technical technician
Safe shipping of heavy industrial devices
Set the precise adjustment of the blade guides and axes
Sharp and the full replacement of the blade with the main brands
Reconstruction and painting of the body of the device
Industrial Power Service and Machine Power Panel
Reinstall and Practical Test in Customer Workshop
All of these services are done in accordance with the standards of the metalworking industry and under the supervision of Iran's machine quality control unit.
Why use the original parts?
Using non -original components is one of the most common causes of re -sawing. Fake components often do not have accurate dimensions, are made of non -standard alloys, and do not tolerate pressure and heat in long working conditions.
Iran Machine Manufacturing only uses its original produced parts or approved reputable brands so that each device has the same quality of the factory after repair. This policy has gained the confidence of hundreds of industrial customers in Tehran and across the country.
Important Tips in Maintenance After Saw Repair
Before starting the cut, ensure the correct slice of the blade.
Clean the cooling fluid path.
Replace the gearbox oil every 6 months.
Never use non -standard or inappropriate blades with paid diameter.
After each repair, register the service book and specify the date of the next service.
Implementation of these strategies, the useful life of the strip increases to several years.
Difference of industrial and semi -industrial saws repair
Industrial tape saw
is used for continuous cutting of thick metals in large factories. Repairing this model requires precision tools and laser balance to make the blade path completely smooth.
Semi -industrial strip saw
used in smaller workshops. The building is simpler but its regular service is essential to prevent vibration and fracture.
Iranian machinery repair both types of machines with specialized equipment and appropriate parts of the same model.
The cost of repairing the saw in Tehran
The final cost of repair varies depending on the type of device, the amount of failure, the substitution and the peripheral services. At the Iranian Machinery Center, all tariffs are announced in a transparent and official invoice. The goal is to provide the best service at the lowest cost and the most durable.
Order of specialized repair in Iranian machinery
If your device has a shake, abnormal sound or a drop in quality, call Iran machine now. The technical team of this complex is ready to complete your device in the shortest possible time with years of experience in repairing the saw in Tehran.
Contact the customer service section, register a repair request, or delivery of the device in the Tehran Central Workshop, ensure that your device will work with the original components and precise technical adjustment such as the first day.
Conclusion
Saw repair with the main parts in Tehran only has a desirable result when it is done by specialist repairers and with standard equipment. Iran Machinery Complex offers all the decades of experience in the field of industrial machinery, providing all repair, adjustment and reconstruction services with quality guarantees.
By selecting this valid collection, you can be sure of your precise performance, high durability and no shake performance for years.
